中文版 | English
 SC(B)11 Epoxy resin casting dry-type distribution transformer
Home >> Product Show
Product Overview：
SC(B)10 epoxy resin casting dry-type distribution transformer, applicable to energy saving and environmental protection, features insulation class F. Compared with performance indicators in Group B of GB/T 10228-2008 Technical parameters and requirements of dry-type power transformer, it features no-load loss on average for 10% lower, load loss reduced for 5% down. It is characterized at flame retardant, high fire resistance, pollution-free, maintenance-free, low loss, low partial discharge, low noise, high heat dissipation, convenient installation, low integrated operating cost, strong thermal shock withstanding, large over-load capacity, high reliability, insensitivity to humidity and dust, direct installation in load center as well as other advantages, creating its wide adaptability.
Product Features：
This core is structured in 45° miter joint and step ladder lamination. Therefore the product features low no-load loss and noise.
Low-voltage coil is wound by quality oxygen-free copper coil or glass film-wound oxygen-free copper flat wire, structured in foil or cylindrical shape, encapsulated with resins at the ends, as a rigid entirety by high temperature curing, strongly capable of short circuit resistance; high-voltage coil is structured in segmented, cylindrical and multi-layer shape, supported by glass fiber mesh, casted by the resin under vacuum, as a rigid entirety by high temperature curing, i.e. coil conductors are encapsulated by solid insulating layer of epoxy resin. It is hard for moisture immersion, and meanwhile it features good performance in moisture and pollution prevention, high mechanical strength, strong resistance to sudden short-circuit, as well as resistance to lightning strike.
Technical Parameter Table：

Rated capacity

kVA

Voltage combination

Connection symbol

 

No-load loss

W

Load loss

(145℃)

No-load current

%

Short-circuit impedance

%

Overall dimension（mm）

L x W x H

Weight

kg

Installation dimension

（mm）

High voltage

kV

Tapping range of high voltage

%

Low voltage

 kV

30

6

6.3

10

10.5

11

±5%

or

±2x

2.5%

0.4

Yyn0

or

Dyn11

170

710

2.3

4

880×600×765

320

550×550

50

240

1000

2.2

4

960×750×805

470

550×714

80

330

1380

1.7

4

980×750×895

510

550×714

100

360

1570

1.7

4

1010×750×910

700

550×710

125

420

1850

1.5

4

1050×830×1000

750

660×780

160

480

2130

1.5

4

1050×830×1010

890

660×780

200

550

2530

1.3

4

1060×870×1135

1050

660×820

250

640

2760

1.3

4

1210×1000×1140

1210

660×964

315

790

3470

1.1

4

1220×1000×1140

1450

660×964

400

880

3990

1.1

4

1290×1000×1220

1680

660×964

500

1040

4880

1.1

4

1320×1000×1285

1910

660×964

630

1170

5960

0.9

6

1530×1000×1205

2130

660×964

800

1360

6960

0.9

6

1570×1000×1300

2610

660×964

1000

1590

8130

0.9

6

1630×1200×1390

3070

820×1164

1250

1880

9690

0.9

6

1650×1200×1510

3540

820×1164

1600

2200

11730

0.9

6

1660×1200×1650

4500

820×1164

2000

2740

14450

0.7

6

1750×1200×1750

5150

820×1164

2500

3240

17170

0.7

6

1940×1400×1820

6050

1070×1364

Note: The overall dimension is only for reference and subject to product drawing.
Copyright © GuangDong WELECTONE Transforver Co. All Rights Reserved.  粤ICP备14020136号-1  Technical support：TengmeiAD

About us
News
Product
Service and Support